View UPG2030TK1_4479750.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
GaAs INTEGRATED CIRCUIT
PG2030TK
L, S-BAND SPDT SWITCH

DESCRIPTION
The PG2030TK is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which were developed for mobile phone and other L, S-band applications. This device can operate 2 control switching by control voltage 2.7 to 5.3 V, at frequencies from 0.5 to 2.5 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin lead-less minimold package and is suitable for high-density surface mounting.
FEATURES
* Switch control voltage * Low insertion loss : Vcont (H) = 2.7 to 5.3 V (2.8 V TYP.) : Vcont (L) = -0.2 to +0.2 V (0 V TYP.) : LINS1 = 0.25 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont = 2.8 V/0 V : LINS2 = 0.30 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont = 2.8 V/0 V : LINS3 = 0.35 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont = 2.8 V/0 V * High isolation * High power : ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, Vcont = 2.8 V/0 V : ISL2 = 24 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont = 2.8 V/0 V : Pin (0.1 dB) = +27.0 dBm TYP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V : Pin (1 dB) = +30.0 dBm TYP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V (Reference value) * High-density surface mounting : 6-pin lead-less minimold package (1.5 x 1.1 x 0.55 mm)
APPLICATIONS
* PCS, W-LAN, WLL and BluetoothTM etc.
ORDERING INFORMATION
Part Number Order Number Package 6-pin lead-less minimold (1511 PKG) (Pb-free) Marking G3R Supplying Form * Embossed tape 8 mm wide * Pin 1, 6 face the perforation side of the tape * Qty 5 kpcs/reel
PG2030TK-E2
PG2030TK-E2-A
Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: PG2030TK
Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. PG10409EJ03V0DS (3rd edition) Date Published August 2009 NS Printed in Japan
The mark shows major revised points.
2003, 2009
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
PG2030TK

PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. 1 Pin Name OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1
(Top View)
1 2 3 OUTPUT1 6 1 5 GND 2
(Top View)
Vcont1 6 INPUT 5 Vcont2 4 6 5 4
(Bottom View)
1 2
2 3 4
TRUTH TABLE
Vcont1 Low High Vcont2 High Low INPUT-OUTPUT1 ON OFF INPUT-OUTPUT2 OFF ON
ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified)
Parameter Symbol Vcont Pin TA Tstg Ratings 6.0
Note
G3R
Parameter
OUTPUT2 4 3
3
5 6
Unit V dBm C C

Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature
+33 -45 to +85 -55 to +150

Note Vcont1 - Vcont2 6.0 V
RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified)
Symbol Vcont (H) Vcont (L) MIN. 2.7 -0.2 TYP. 2.8 0 MAX. 5.3 0.2 Unit V V

Switch Control Voltage (H) Switch Control Voltage (L)
2
Data Sheet PG10409EJ03V0DS
PG2030TK
ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Isolation 1 Isolation 2 Input Return Loss Output Return Loss 0.1 dB Gain Compression Input Power
Note
Symbol LINS1 LINS2 LINS3 ISL1 ISL2 RLin RLout
Test Conditions f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0.5 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz
MIN. - - - 23 20 15 15 +25.5 +25.5 - -
TYP. 0.25 0.30 0.35 27 24 20 20 +27.0 +27.0 4 50
MAX. 0.45 0.50 0.55 - - - - - - 20 500
Unit dB dB dB dB dB dB dB dBm dBm
Pin (0.1 dB) f = 2.0 GHz f = 2.5 GHz Icont tSW No signal
Switch Control Current Switch Control Speed
A
ns
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range.
STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter 1 dB Gain Compression Input Power
Note
Symbol Pin (1 dB)
Test Conditions f = 2.0 GHz
MIN. -
TYP. +30.0
MAX. -
Unit dBm
Note Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. The range of recommended DC cut capacitor value is less than 100 pF.
Data Sheet PG10409EJ03V0DS
3
PG2030TK
EVALUATION CIRCUIT (Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF)
Vcont1 INPUT Vcont2
56 pF 1 000 pF 6 5 4 1 000 pF
1
2
3
56 pF
56 pF
OUTPUT1
OUTPUT2
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
Data Sheet PG10409EJ03V0DS
PG2030TK
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
Vcont2
6pin L2MM SPDT SW
Vc1
OUTPUT2 OUT 1
C2
C 2
C
4
C1 INPUT C1 IN
C 5
C3
G3R
C1
C 1
C2
OUT 2
OUTPUT1
Vc2
Vcont1
USING THE NEC EVALUATION BOARD
Symbol C1, C2, C3 C4, C5 Values 56 pF 1 000 pF
Data Sheet PG10409EJ03V0DS
5
PG2030TK
TYPICAL CHARACTERISTICS (TA = +25C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified)
INPUT-OUTPUT1 INSERSION LOSS vs. FREQUENCY
0.5 0.4
Insersion Loss LINS (dB) Insersion Loss LINS (dB)
INPUT-OUTPUT2 INSERSION LOSS vs. FREQUENCY
0.5 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
INPUT-OUTPUT1 ISOLATION vs. FREQUENCY
50 40 30
Isolation ISL (dB)
INPUT-OUTPUT2 ISOLATION vs. FREQUENCY
50 40 30
Isolation ISL (dB)
20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
INPUT-OUTPUT1 INPUT RETURN LOSS vs. FREQUENCY
50 40
Input Return Loss RLin (dB) Input Return Loss RLin (dB)
INPUT-OUTPUT2 INPUT RETURN LOSS vs. FREQUENCY
50 40 30 20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
30 20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PG10409EJ03V0DS
PG2030TK
INPUT-OUTPUT1 OUTPUT RETURN LOSS vs. FREQUENCY
50 40 30 20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
INPUT-OUTPUT2 OUTPUT RETURN LOSS vs. FREQUENCY
50 40 30 20 10 0 -10 -20 -30 -40 -50 0.5 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Frequency f (GHz)
Output Return Loss RLout (dB)
OUTPUT POWER vs. INPUT POWER
40 f = 1.0 GHz 35 35 40
Output Return Loss RLout (dB)
OUTPUT POWER vs. INPUT POWER
f = 2.5 GHz
Output Power Pout (dBm)
30 25 20 15 10 5 0 10 15 20 25 30 35 40
Output Power Pout (dBm)
30 25 20 15 10 5 0 10 15 20 25 30 35 40
Input Power Pin (dBm)
Input Power Pin (dBm)
Remark The graphs indicate nominal characteristics.
Data Sheet PG10409EJ03V0DS
7
PG2030TK

PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511 PKG) (UNIT: mm)
(Top View) (Bottom View)
0.480.05 0.480.05
1.50.1
1.10.1 1.30.05
*1
0.20.1 a
0.160.05
0.90.1 b
*2
c
0.550.03
Remark Dimension is bigger than dimension (dimension = a + b + c).
*1
0.11+0.1 -0.05
*2
*2
8
Data Sheet PG10409EJ03V0DS
PG2030TK

RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 WS260 Condition Symbol IR260
For soldering
Preheating temperature (package surface temperature) : 120C or below
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10409EJ03V0DS
9
PG2030TK
Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A.
* The information in this document is current as of August, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E0904E
10
Data Sheet PG10409EJ03V0DS
PG2030TK
Caution
GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of UPG2030TK1

	To Download UPG2030TK1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .